Need Help! Issue with my Laser cutter..


Results 1 to 3 of 3

Thread: Issue with my Laser cutter..

  1. #1
    Registered
    Join Date
    Mar 2018
    Location
    United Kingdom
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default Issue with my Laser cutter..

    Hi

    I'm new on here and hopefully someone form this amazing resource of knowledge/experience can shed light onto an issue with my generic 6090 chinese laser cutter?


    Basically...I'm running a Ruida RCD 6442 s(EG) controller- laser just stopped halfway through a an engraving job with laser Head staying put in position.


    No alarm sound.
    Think poss reboot- switch off then on - screen message "connecting to controller" just stays like that, no initialising.

    Check inside..

    Controls board - just Led 15 lit, Led 14 not lit.


    Green lights on X & Y drivers


    Water chillers appears ok - water flowing etc.


    Test Fire PSU - nothing


    Not sure if PSU has green LED until it fires, fan is working.


    Has been cold in the studio (UK) but I always heat the space up prior to using the machine and it had been working all day - stopped at 3.30pm.
    Wasn't sure if temp can effect controllers etc.


    Thinking if 14Led not lit.. flow sensor issue... but no alarm and seems to be working fine?


    Appreciate you're help.


    thanks


    Si








    Similar Threads:


  2. #2
    Member
    Join Date
    Apr 2006
    Location
    usa
    Posts
    108
    Downloads
    0
    Uploads
    0

    Default Re: Issue with my Laser cutter..

    Hello,

    You have a pretty good description of the status, but did not say anything about a blinking light.

    Look at the controller. Is one of the lights blinking. If not... Your controller is locked up.

    You might be able to reboot and install a new project. .. or new firmware.

    Ray Scott
    Rabbit Laser USA



  3. #3
    Member germanr's Avatar
    Join Date
    Aug 2018
    Location
    Buenos Aires
    Posts
    17
    Downloads
    0
    Uploads
    0

    Default Re: Issue with my Laser cutter..

    Hi.
    You could check that the controller is properly grounded. If it does not have good grounding it produces random errors until it ends up burning.
    The Chinese try to save on everything! sometimes they do not put the wires to the ground.

    Good Luck!

    German Rothar
    BuchiCNC USA

    You can check our CO2 laser cutters here:
    CO2 Laser cutting machines

    If you want a metal laser engraver:
    Laser metal engravers

    Great CNC Router:
    CNC Routers

    Soy tecnico de laser con experiencia.<br />Usuario de maquina de corte laser Buchicnc EVO 14.<br />Usuario de grabadora laser por fibra EVO 5.<br />Usuario de router CNC, con mesa de 3 x 2 mts Auto Tool Changer<br />Diseño mis propios archivos maquinas de corte laser con CorelDraw, LaserCut 5.3, RDWorks V8.<br /><a href="https://buchicnc.com" target="_blank">Estas son mis maquinas de corte láser BuchiCNC</a><br /><a href="https://buchicnc.com/producto/maquina-de-corte-laser-evo-14/" target="_blank">EVO 14</a><br /><a href="https://buchicnc.com/producto/maquina-de-corte-laser-evo-5/" target="_blank">EVO 5</a><br /><br /><a href="https://buchicnc.com/en/" target="_blank">Laser cutters &amp; CNC Routers BuchiCNC USA</a><br /><a href="https://buchicnc.com/en/product/cnc-router-mr-atc-6-standard-line/" target="_blank">CNC Router ATC</a><br /><a href="https://buchicnc.com/en/product/laser-cutting-machine-evo-14/" target="_blank">EVO 14</a>


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Issue with my Laser cutter..

Issue with my Laser cutter..