Lasercad & awc608 plus help


Results 1 to 2 of 2

Thread: Lasercad & awc608 plus help

  1. #1
    Registered
    Join Date
    Jul 2017
    Location
    Australia
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default Lasercad & awc608 plus help

    hi all first time poster but long time reader, i just purchased a 100w machine that was fitted out with a sinjoe awc608c plus controller.
    now i am having issues with setting up the origins and home i think as everytime i try to cut i am getting a message "beyong size continue ?" or engrave beyond size" continue message.
    i have tried as much as i could and i have read plenty on here but no success.
    can someone please shed some light.
    thanks in advance ........
    also im using coreldraw 17 if thats of any help

    Similar Threads:


  2. #2
    Member
    Join Date
    Jan 2019
    Location
    Phelan
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default Re: Lasercad & awc608 plus help

    I know how to open the bed size its in manufacturer parameters. Im having a problem with my bed size to. I dont know how to set the size so my laser stoos whrn it returns to home



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Lasercad & awc608 plus help

Lasercad & awc608 plus help

Lasercad & awc608 plus help