Need Help! Laser beam wobble


Results 1 to 2 of 2

Thread: Laser beam wobble

  1. #1
    Member mcdonald79's Avatar
    Join Date
    Oct 2021
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default Laser beam wobble

    Help! I am new to lasers. This is an 80 watt red/black Chinese machine.
    Power level 9ma.
    Chiller temp 72 deg f
    What makes the beam wobble at the output end?
    thanks!

    Similar Threads:
    Attached Files Attached Files


  2. #2
    Member
    Join Date
    Nov 2008
    Location
    USA
    Posts
    644
    Downloads
    0
    Uploads
    0

    Default Re: Laser beam wobble

    I run my temperature at 62 deg F and 9 ma seams low for an 80 watt tube. But neither would make the beam wobble. Never heard that before, maybe the tube is going bad. Or there is a mechanical vibration in the machine.


    Sent from my iPhone using Tapatalk



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Laser beam wobble

Laser beam wobble