High power wire splice and extension


Results 1 to 2 of 2

Thread: High power wire splice and extension

  1. #1
    Member
    Join Date
    Jan 2011
    Location
    usa
    Posts
    129
    Downloads
    0
    Uploads
    0

    Default High power wire splice and extension



  2. #2
    Member CitizenOfDreams's Avatar
    Join Date
    Nov 2012
    Location
    USA
    Posts
    1267
    Downloads
    4
    Uploads
    0

    Default Re: High power wire splice and extension

    Pomona makes test lead wires rated at 10kV and more; this is what I used in the past for similar applications.

    Here is how I spliced it:
    - make a smooth solder joint with no sharp edges;
    - smear some silicone sealant over the wires;
    - put a heat shrink tube over it;
    - another layer of silicone;
    - another heat shrink tube.

    You can shrink the tube right over uncured silicone. The excess will squeeze out.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

High power wire splice and extension

High power wire splice and extension