Realistic life of Chinese laser tubes - Page 3


Page 3 of 3 FirstFirst 123
Results 41 to 42 of 42

Thread: Realistic life of Chinese laser tubes

  1. #41
    Member glenn0411's Avatar
    Join Date
    Nov 2018
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default Re: Realistic life of Chinese laser tubes

    i use an SPT 45w tube.....for last 3 years....never run full power....i've cut up to 1/4 inch cast acrylic, end currently use to engrave self adhesive 2 color labels for friends business....have replaced mirrors, lenses, belts, limit switches....but not tube yet......hours? 5 hours week for 45-50 weeks X 3 years....watch your temps...dont run full power...has been great......soon as i have to increase power to compensate.....i'll buy another



  2. #42
    Member hangrex5's Avatar
    Join Date
    Jan 2021
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default Re: Realistic life of Chinese laser tubes

    Your tube may be rated for 1000 hours of life. If you overdrive it, you'll get more power, but tube life will be greatly reduced.



Page 3 of 3 FirstFirst 123

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Realistic life of Chinese laser tubes

Realistic life of Chinese laser tubes