Need Help! Need Post Processor for the Larkin to load into Fusion 360


Results 1 to 2 of 2

Thread: Need Post Processor for the Larkin to load into Fusion 360

  1. #1
    Registered
    Join Date
    Mar 2018
    Location
    Canada
    Posts
    0
    Downloads
    0
    Uploads
    0

    Question Need Post Processor for the Larkin to load into Fusion 360

    I've searched around and not been able to find one. Is there a post processor that comes with Fusion 360 that works with StarCNC Controller for the Larkin CNC mill? If not, is there one out there or one that I already have that could be modified?

    All assistance is much appreciated.

    Similar Threads:


  2. #2
    Registered
    Join Date
    Jun 2011
    Location
    Canada
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default Re: Need Post Processor for the Larkin to load into Fusion 360

    I have an old 2440 that I make guitars with. MR Kenny at Larken recommended using a basic Fanuc post, and that what I use



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Need Post Processor for the Larkin to load into Fusion 360

Need Post Processor for the Larkin to load into Fusion 360