Driver Fried


Results 1 to 2 of 2

Thread: Driver Fried

  1. #1
    Registered
    Join Date
    Apr 2007
    Location
    Canada
    Posts
    8
    Downloads
    0
    Uploads
    0

    Default Driver Fried

    I called Larry and left a message that I smoked a driver on my Mach3 controller that he built. I had no reply from him. He is in the other end of Ottawa which is real convenient for me, if he cared to reply and give me some support. I have used his 24/24 for about 15 years starting with Lcam but now he has decided to dump me and not return my call.so......I bought a new Robotix controller and new motors and it is running better than it ever has with Larrycam. I am also running on Linuxcnc and probably going to use a MESA card as well. It runs smoother, quieter and better than ever!!

    Thanks Larry for the upgrade!!!

    Similar Threads:


  2. #2
    Company Representative
    Join Date
    Feb 2007
    Location
    canada
    Posts
    938
    Downloads
    0
    Uploads
    0

    Default Re: Driver Fried

    I'm glad your happy with the new controller (of course a new controller will work better than 15 old technology )

    but, sorry if i missed your call. Did you try to email ?

    Your welcome for the 15 years of support. good luck !

    Larry

    Manufacturer of CNC routers and Viper Servo Drives
    www.LarkenCNC.com and www.Viperservo.com


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Driver Fried

Driver Fried