How old is the machine. Can you email me pictures of inside the controller.
Larken@storm.ca
Larry
I have been running the Larken 2424 for oover 5 years now, with few problems. However, this morning, I just finished resurfacing my work surface and was setting up for a fresh job when I lost any X axis control. The software window shows the position changing, but the stepper is not rotating. I changed out the stepper for a spare, and got no action. I also opened up the controller case and checked for any parts that might have let out their magic smoke. The X axis card was clearly marked but looked fine. No problems were noted. The fuse for the X axis looks fine. I don't think it is for the power side though, as it is very fine filament. Didn't bother to try and read its rating.
The LED on the card lights up when a jog is requested, just like the other axes, but that is as far as I got. Any ideas?
Thanks,
P
Similar Threads:
- Tale of the lost 4th axis
- Need Help!- Lost 4th Axis
- Lost My X-Axis
- Need Help!- lost on z axis kit
- 0T X-axis Gets lost
How old is the machine. Can you email me pictures of inside the controller.
Larken@storm.ca
Larry
Manufacturer of CNC routers and Viper Servo Drives
www.LarkenCNC.com and www.Viperservo.com