Need Help! Spindle will not start


Results 1 to 5 of 5

Thread: Spindle will not start

  1. #1
    Registered
    Join Date
    Jun 2007
    Location
    USA
    Posts
    26
    Downloads
    0
    Uploads
    0

    Default Spindle will not start

    Yesterday I used the machine and it worked fine.

    Still - I needed to turn on/off the spindle in the spooler by clicking the spindle on off button.

    This morning - I cannot get the spindle to start at all.

    Is there any way I can get some help?

    I got the spindle to start - by changing "controller type" I am using type 2 controller.

    Still - even though the configuration area, has the spindle auto start and auto stop checked ---- the spindle does not stop automatically.

    Similar Threads:
    Last edited by Arcticfox46; 07-19-2010 at 11:31 AM.


  2. #2
    Member
    Join Date
    Feb 2007
    Location
    canada
    Posts
    962
    Downloads
    0
    Uploads
    0

    Default

    Yes your controller type should have been REV-2. If not then the spindle won't start. What was it set to ?

    Does the spindle start when you click the spindle start butt on the screen or just not start from a file ?

    Larry K

    Manufacturer of CNC routers and Viper Servo Drives
    www.LarkenCNC.com and www.Viperservo.com


  3. #3
    Registered
    Join Date
    Jun 2007
    Location
    USA
    Posts
    26
    Downloads
    0
    Uploads
    0

    Default

    With Larry's help the spindle start/stop problem has been solved and is no longer a problem



  4. #4
    Member
    Join Date
    Jan 2006
    Location
    USA
    Posts
    179
    Downloads
    0
    Uploads
    0

    Default Re: Spindle will not start

    Quote Originally Posted by Arcticfox46 View Post
    With Larry's help the spindle start/stop problem has been solved and is no longer a problem
    I am having the same issue with my machine. What did you do to resolve it?



  5. #5
    Member
    Join Date
    Feb 2007
    Location
    canada
    Posts
    962
    Downloads
    0
    Uploads
    0

    Default Re: Spindle will not start

    Maybe contact Larken ?

    Manufacturer of CNC routers and Viper Servo Drives
    www.LarkenCNC.com and www.Viperservo.com


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Spindle will not start

Spindle will not start