Yes your controller type should have been REV-2. If not then the spindle won't start. What was it set to ?
Does the spindle start when you click the spindle start butt on the screen or just not start from a file ?
Larry K
Yesterday I used the machine and it worked fine.
Still - I needed to turn on/off the spindle in the spooler by clicking the spindle on off button.
This morning - I cannot get the spindle to start at all.
Is there any way I can get some help?
I got the spindle to start - by changing "controller type" I am using type 2 controller.
Still - even though the configuration area, has the spindle auto start and auto stop checked ---- the spindle does not stop automatically.
Similar Threads:
Last edited by Arcticfox46; 07-19-2010 at 11:31 AM.
Yes your controller type should have been REV-2. If not then the spindle won't start. What was it set to ?
Does the spindle start when you click the spindle start butt on the screen or just not start from a file ?
Larry K
With Larry's help the spindle start/stop problem has been solved and is no longer a problem
Maybe contact Larken ?