Enclosure for a Enshu AccuMill

Results 1 to 2 of 2

Thread: Enclosure for a Enshu AccuMill

  1. #1
    Registered
    Join Date
    Mar 2009
    Location
    USA
    Posts
    15
    Downloads
    0
    Uploads
    0

    Default Enclosure for a Enshu AccuMill

    Hello,

    We have an Enshu AccuMill AM-1475 Vertical Knee Vertical Mill and we would like to fabricate an enclosure to keep all the chips and cooling fluids contained.

    Wondering if anyone has already done this or has an idea for something simple that would be as affective as a full enclosure but not as time consuming or costly.

    We mill Stainless Steel only and the chips get stuck every where and quite painful when you get the little splinters all over the place.

    Thanks

    Adam

    Similar Threads:


  2. #2
    Member cannonmn's Avatar
    Join Date
    Aug 2020
    Posts
    14
    Downloads
    0
    Uploads
    0

    Default Re: Enclosure for a Enshu AccuMill

    I have problem with same system, a “not ready” alarm that won’t go away. Details here, pls help.

    https://www.cnczone.com/forums/fanuc...tem-ready.html



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Enclosure for a Enshu AccuMill

Enclosure for a Enshu AccuMill

Enclosure for a Enshu AccuMill