HELP, Extron B4FC/ Hafco BM 90VCNC mill machine parameters.

Results 1 to 3 of 3

Thread: HELP, Extron B4FC/ Hafco BM 90VCNC mill machine parameters.

  1. #1

    Default HELP, Extron B4FC/ Hafco BM 90VCNC mill machine parameters.

    Hi guys

    I bought a Hafco BM90VCNC mill with Heidenhain TNC310 controller. Batteries went flat and chasing someone who might have a back up
    and able to help.
    The Machine is a rebadge of the Taiwan Extron B4FC sold in Australia.I have tried Extron but cant get a reply

    any help would be greatly appreciated

    Similar Threads:


  2. #2
    Member
    Join Date
    Feb 2008
    Location
    Australia
    Posts
    69
    Downloads
    0
    Uploads
    0

    Default Re: HELP, Extron B4FC/ Hafco BM 90VCNC mill machine parameters.

    I don't have one, but maybe try CNC zone forum, a lot of Aussies there, or a dedicated forum for your machine.

    Sad to hear your backup batteries died and you have no support, have you contacted H&F?
    I'm sure it was expensive to buy, and should have backup support 100%.

    Sent from my 5007U using Tapatalk



  3. #3

    Default Re: HELP, Extron B4FC/ Hafco BM 90VCNC mill machine parameters.

    Hi Davo

    I have tried H&F they have done what they can.
    The issue is Extron who don't reply to them after multiple emails.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

HELP, Extron B4FC/ Hafco BM 90VCNC mill machine parameters.

HELP, Extron B4FC/ Hafco BM 90VCNC mill machine parameters.