- HELP, Extron B4FC/ Hafco BM 90VCNC mill machine parameters.
-
Member
HELP, Extron B4FC/ Hafco BM 90VCNC mill machine parameters.
Hi guys
I bought a Hafco BM90VCNC mill with Heidenhain TNC310 controller. Batteries went flat and chasing someone who might have a back up
and able to help.
The Machine is a rebadge of the Taiwan Extron B4FC sold in Australia.I have tried Extron but cant get a reply
any help would be greatly appreciated
Similar Threads:
-
-
Member
Re: HELP, Extron B4FC/ Hafco BM 90VCNC mill machine parameters.
I don't have one, but maybe try CNC zone forum, a lot of Aussies there, or a dedicated forum for your machine.
Sad to hear your backup batteries died and you have no support, have you contacted H&F?
I'm sure it was expensive to buy, and should have backup support 100%.
Sent from my 5007U using Tapatalk
-
Member
Re: HELP, Extron B4FC/ Hafco BM 90VCNC mill machine parameters.
Hi Davo
I have tried H&F they have done what they can.
The issue is Extron who don't reply to them after multiple emails.
- HELP, Extron B4FC/ Hafco BM 90VCNC mill machine parameters.
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules