Dyna Mechtonics DM4400 stepper motor and drives

[dserratt1]

Hello
I purchased a DM4400 with no stepper drives and installed 3 leadshine clone hss86 hybrid drives. My problem id the encoder wiring. The drive is looking for channel A+ A- B+ B- and the motor only has A+ B+, I tried using the 5v - but the drive still won't run the motor.

[jduke]

Hello
I purchased a DM4400 with no stepper drives and installed 3 leadshine clone hss86 hybrid drives. My problem id the encoder wiring. The drive is looking for channel A+ A- B+ B- and the motor only has A+ B+, I tried using the 5v - but the drive still won't run the motor.

Do you have any pictures of the motors, I have a dm4400 and am interested in what they look like.

Duke