Kitamura Myturn 10 Control Fanuc OT


Results 1 to 2 of 2

Thread: Kitamura Myturn 10 Control Fanuc OT

  1. #1
    Eangel29's Avatar
    Join Date
    May 2019
    Posts
    3
    Downloads
    0
    Uploads
    0

    Post Kitamura Myturn 10 Control Fanuc OT

    Hello my name is Ernesto we have a Kitamura Myturn 10 with a Fanuc OT CNC lathe, we lost the parameters, but we were able to get them back in, but we are still having and issue inputting the "diagnostic parameter"

    we turn the knob to MDI, then the PWE switch to 1 (enable) and we try to input the diagnostic parameters on the hard copy that came with the machine they begin at N10300, we need to change N10310 from 00110000 to 00110010, but for some reason it does not take the first 2 digits from left to right, also try to change N10312 but it doesn't move at all.

    We try the same with the E stop pushed in and got the same results, does anybody know anything about how to take care of this issue?

    Thanks,

    Ernesto



  2. #2
    Member
    Join Date
    Oct 2009
    Location
    Mexico
    Posts
    297
    Downloads
    0
    Uploads
    0

    Default Re: Kitamura Myturn 10 Control Fanuc OT

    Quote Originally Posted by Eangel29 View Post
    Hello my name is Ernesto we have a Kitamura Myturn 10 with a Fanuc OT CNC lathe, we lost the parameters, but we were able to get them back in, but we are still having and issue inputting the "diagnostic parameter"

    we turn the knob to MDI, then the PWE switch to 1 (enable) and we try to input the diagnostic parameters on the hard copy that came with the machine they begin at N10300, we need to change N10310 from 00110000 to 00110010, but for some reason it does not take the first 2 digits from left to right, also try to change N10312 but it doesn't move at all.

    We try the same with the E stop pushed in and got the same results, does anybody know anything about how to take care of this issue?

    Thanks,

    Ernesto
    Hello:
    What is the problem that you have? Do you have any alarm?

    Regards
    AlexFanuc



Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Kitamura Myturn 10 Control Fanuc OT

Kitamura Myturn 10 Control Fanuc OT