Build Thread Kitamura Minisuper 300 Retrofit - Part2


Results 1 to 5 of 5

Thread: Kitamura Minisuper 300 Retrofit - Part2

  1. #1
    Member
    Join Date
    Apr 2006
    Location
    Spain
    Posts
    8
    Downloads
    0
    Uploads
    0

    Default Kitamura Minisuper 300 Retrofit - Part2



  2. #2
    Member
    Join Date
    Apr 2006
    Location
    Spain
    Posts
    8
    Downloads
    0
    Uploads
    0

    Default Re: Kitamura Minisuper 300 Retrofit - Part2



















  3. #3
    Member
    Join Date
    Apr 2006
    Location
    Spain
    Posts
    8
    Downloads
    0
    Uploads
    0

    Default Re: Kitamura Minisuper 300 Retrofit - Part2



















  4. #4

    Default Re: Kitamura Minisuper 300 Retrofit - Part2

    Nice work.



  5. #5
    Member
    Join Date
    Apr 2006
    Location
    Spain
    Posts
    8
    Downloads
    0
    Uploads
    0

    Default Re: Kitamura Minisuper 300 Retrofit - Part2

    Many thanks :-)
    Now the machine is abandonated for some weeks. Mounting the slidecovers I noted that some parts are missing.
    Someone has changed the position of the limit switches, to get a little bit more travel. But of this reason he take out the slidecover.

    I had a look to some videos on youtube, bit nothing. I can´t localize the original part, because its under the table cover.

    Now I redesigned the missing piece and sent it to laser cutting and bending. If I get the pieces, I will weld together and paint them.
    Its a slide cover to cover the Y-Axis and the front part of the lower case.






Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Kitamura Minisuper 300 Retrofit - Part2

Kitamura Minisuper 300 Retrofit - Part2