mycenter 1 - fanuc 3m model c / atc problem


Results 1 to 8 of 8

Thread: mycenter 1 - fanuc 3m model c / atc problem

  1. #1
    Member DrStein99's Avatar
    Join Date
    Jul 2005
    Location
    United States
    Posts
    261
    Downloads
    0
    Uploads
    0

    Default mycenter 1 - fanuc 3m model c / atc problem

    The led display does not seem to move away from "1" when I advance carousel. When in MDI mode, do "M6 T2" does NOTHING. Just did a master reset (accidentally) and wiped parameters - just put them all back in. I understand there is a tool macro that is executed? I copied from another machine - not sure where supposed to go #9001? 9000? 9020?

    Can anyone advise please?

    Similar Threads:
    WWW.RAIDGEAR.NET - FFC cables, foam headset replacement parts, and other gadgets.


  2. #2
    Registered
    Join Date
    May 2013
    Location
    cro
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default

    I think, usually is 9020 program with tool change sequence.



  3. #3
    Registered
    Join Date
    May 2013
    Location
    India
    Posts
    128
    Downloads
    0
    Uploads
    0

    Default

    9001



  4. #4

    Default Re: mycenter 1 - fanuc 3m model c / atc problem

    I am also having the same exact issue, not sure what to do from this point on. Can someone please shed some light on this topic please? My machine is a 1983 Kitamura Mycenter1 with Fanuc 3M-C control VMC



  5. #5
    dardo's Avatar
    Join Date
    Apr 2016
    Location
    mendoza
    Posts
    5
    Downloads
    0
    Uploads
    0

    Default

    Hola,soy nuevo en el foro. Le comento que tengo una KITAMURA MYCENTER 1 FANUC OM,El cual me esta dando dolores de cabeza últimamente. Cuando enciendo la maquina la luz INDEX del pulsador permanece intermitente y nose como solucionarlo, soy de Mendoza argentina y aquí todavía no encuentro quien lo pueda solucionar. Me urge mucho poder repararla, cualquier comentario con respecto al tema me seria de gran ayuda. Graaacias



  6. #6
    Member
    Join Date
    Aug 2016
    Location
    Mexico
    Posts
    24
    Downloads
    0
    Uploads
    0

    Default Re: mycenter 1 - fanuc 3m model c / atc problem

    You have pictures of your team's problem, I can support you:


    antonio_aries_94@hotmail.com



  7. #7
    Registered
    Join Date
    Feb 2018
    Location
    Mexico
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default

    Quote Originally Posted by alexeye169 View Post
    I am also having the same exact issue, not sure what to do from this point on. Can someone please shed some light on this topic please? My machine is a 1983 Kitamura Mycenter1 with Fanuc 3M-C control VMC

    Did you solve your problem?
    Do you recommend that CNC (kitamura mycenter 1 fanuc 3M)?
    I'm going to buy an equal but I've never worked a kitamura



  8. #8
    Member
    Join Date
    Apr 2007
    Location
    USA
    Posts
    144
    Downloads
    0
    Uploads
    0

    Default Re: mycenter 1 - fanuc 3m model c / atc problem

    The Kitamura Mycenter 1 w/Fanuc 3M control does not use a 9001-macro for the ATC. It is completely controlled by relay logic.
    * Confirm that the ATC is retracted
    * Confirm that the ATC is UP
    * Confirm that the spindle tool is CLAMPED
    * Confirm that the ATC TOOL POCKET opposite the spindle is the number shown in the LED window.
    Note: The pocket opposite the spindle must always be empty.

    Command Txx M06; in MDI. What happens?



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

mycenter 1 - fanuc 3m model c / atc problem

mycenter 1 - fanuc 3m model c / atc problem