2dn LS overtravel


Results 1 to 6 of 6

Thread: 2dn LS overtravel

  1. #1
    Registered
    Join Date
    Dec 2011
    Location
    Mexico
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default 2dn LS overtravel

    Hi there.

    I have a problem with my Kitamura mycenter 1 with Fanuc control. I was checking the limit switches and touched one of them with a piece of metal and it activated, now I have an alarm 1011 overtravel (2d LS). I cant move any of the axes and neither get rid off the this alarm.

    Similar Threads:


  2. #2
    Registered
    Join Date
    Feb 2012
    Location
    US
    Posts
    6
    Downloads
    0
    Uploads
    0

    Default

    Im told that holding the 2nd ls switch overides the overlimit but it dosent work for me..... I manually turn the screw untill its off the switch and then re start the machine Ive done this several times with our kitamura mycenter1

    if the machine is not in overtravel and you acttivated the switch and it wont come out of lock even if you restart the switch is probably stuck so take the switch apart and find the problem
    take care
    JAK



  3. #3
    Registered
    Join Date
    Jan 2011
    Location
    China
    Posts
    52
    Downloads
    0
    Uploads
    0

    Default

    Hi,
    I have the Troubleshooting for the Kitamura Mycenter HX400iF,May be the same as your machines. You can reference attachment.

    Attached Files Attached Files
    Aaron


  4. #4
    Registered
    Join Date
    Nov 2009
    Location
    USA
    Posts
    71
    Downloads
    0
    Uploads
    0

    Default

    Not sure how much you are familiar with Kitamura's apologies.

    The second limit remove switch should be held on to disable the second limit switch. Set the axis switch and move the axis with the handle be sure to set the increments to X10. Then remove the faulty switch and clean out the plunger. It’s pretty simple I had to clean both the X and Y axis switch on a Mycenter 1



  5. #5
    Member
    Join Date
    Apr 2007
    Location
    India
    Posts
    128
    Downloads
    0
    Uploads
    0

    Default

    Dear Friends
    I need Parameter list for Kitamura Mycenter 3 with Fanuc 11m Control

    L. Sakthivel
    Email:info@premierengrs.com, website:www.premierengrs.com


  6. #6
    Member Uky's Avatar
    Join Date
    Apr 2020
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default

    Quote Originally Posted by Eric MFG View Post
    Not sure how much you are familiar with Kitamura's apologies.

    The second limit remove switch should be held on to disable the second limit switch. Set the axis switch and move the axis with the handle be sure to set the increments to X10. Then remove the faulty switch and clean out the plunger. It’s pretty simple I had to clean both the X and Y axis switch on a Mycenter 1
    Not restart



Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

2dn LS overtravel

2dn LS overtravel