I think Dumpster CNC used to make those, and he retired. Not aware of any others.
I built a Joe’s router in 2006. Used it for 100s of projects. But it’s been so long I have lost the sources for some of the hardware. I managed to bust one of the threaded collars used to set the preload on one if the lead screws. They are all 1/2” 10 tpi 2 start screws. Anyone know where i can find threaded collars to fit?
Similar Threads:
I think Dumpster CNC used to make those, and he retired. Not aware of any others.
Gerry
UCCNC 2017 Screenset
[URL]http://www.thecncwoodworker.com/2017.html[/URL]
Mach3 2010 Screenset
[URL]http://www.thecncwoodworker.com/2010.html[/URL]
JointCAM - CNC Dovetails & Box Joints
[URL]http://www.g-forcecnc.com/jointcam.html[/URL]
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)