Need 1/2” 10 tpi 2 start threaded collars

[sblack]

I built a Joe’s router in 2006. Used it for 100s of projects. But it’s been so long I have lost the sources for some of the hardware. I managed to bust one of the threaded collars used to set the preload on one if the lead screws. They are all 1/2” 10 tpi 2 start screws. Anyone know where i can find threaded collars to fit?

Similar Threads:

• Need 1/2in 10 tpi single start acme leadscrew
• ACME Threaded Rod= 1/2"-10 (5-start) x 6'
• ACME Threaded Rod= 1/2"-10 (5-start) x 6'
• 2-Start 1/2" 10 (5 TPI) acme tap?!??!

[ger21]

I think Dumpster CNC used to make those, and he retired. Not aware of any others.

[scttb]

I think Dumpster CNC used to make those, and he retired. Not aware of any others.

Yes! That was it. Too bad he’s gone ??