2 Attachment(s)
Blew away the dust and got something carved
While checking out the work on vectric site I ran across a thread by CLyon
William Morris Illustration [URL="http://vectric.com/forum/viewtopic.php?t=2059&postdays=0&postorder=asc&start=0"]http://vectric.com/forum/viewtopic.php?t=2059&postdays=0&postorder=asc&start=0[/URL] I was really impressed with the piece of art he made from William Morris Illustration. So impressed I needed to have one for myself. So with the help of the internet and of course V-Carve. I was able to get this 11 x 17.5 .5V90 at 65 IPM 20 plunge right at about 3 hours ( V-Carve estimated almosts 5. So I planed on abit of work in the shop to keep me close by.Happy to say it ran great the whole time. I am not completely finished with the finish but had to post. I am pretty happy with this... One of the reasons I wanted build the router in the first place....