When you buy the plans, you have access to Joe's forum, where you can find a lot of help. Just be aware that the actual plans are not for the evolution, so you have to do some digging around his forum to get all of the Evolution information.
Can someone direct me to help on building this machine. Have not bought plans yet but would like advice on possible building problems or issues.
thanks
Similar Threads:
When you buy the plans, you have access to Joe's forum, where you can find a lot of help. Just be aware that the actual plans are not for the evolution, so you have to do some digging around his forum to get all of the Evolution information.
Gerry
UCCNC 2017 Screenset
[URL]http://www.thecncwoodworker.com/2017.html[/URL]
Mach3 2010 Screenset
[URL]http://www.thecncwoodworker.com/2010.html[/URL]
JointCAM - CNC Dovetails & Box Joints
[URL]http://www.g-forcecnc.com/jointcam.html[/URL]
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
I've never built one, and am not all that familiar with it.
I just took a look through his forum.
It looks like the main difference is the side plates and extrusions, and a different Z axis that most members purchase. Maybe rack and pinion was added vs leadscrews?
On his forum, he has a Solidworks E Drawing, and a BOM for all of the parts. Joe also makes and sells the side plates.
It's really not that much different.
Gerry
UCCNC 2017 Screenset
[URL]http://www.thecncwoodworker.com/2017.html[/URL]
Mach3 2010 Screenset
[URL]http://www.thecncwoodworker.com/2010.html[/URL]
JointCAM - CNC Dovetails & Box Joints
[URL]http://www.g-forcecnc.com/jointcam.html[/URL]
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Thanks
I will probably just spring for the plans and get into the forum, and go from there.
I had emailed Joe earlier about some questions and have not heard back from him. Maybe soon
Thanks again
I don't actually know anything about CNC router tables , but I stayed at a Holiday Inn Express last night