Turbojet

Results 1 to 8 of 8

Thread: Turbojet

  1. #1
    Registered
    Join Date
    Feb 2007
    Location
    USA
    Posts
    20
    Downloads
    0
    Uploads
    0

    Default Turbojet

    This is a link to a video of a turbo jet I designed in solidworks. When I go back to school I plan to make a model of the jet with a rapid prototyping machine. I am also thinking of making a working model of the jet in the machine shop at my school. I ordered a book on jet engines but I have not received the book yet so my design so far is based on very limited knowledge. It is in the first stages of design once I study the book I will finalize the design. I still have to design the flame box, and many other components. I limited the number of air foils because it will be difficult to manufacture large quantities of airfoils. Does any one think the airfoils should be closer together.

    http://video.google.com/videoplay?do...arch&plindex=1

    Similar Threads:


  2. #2
    Registered
    Join Date
    Feb 2007
    Location
    USA
    Posts
    20
    Downloads
    0
    Uploads
    0


  3. #3


  4. #4
    Registered
    Join Date
    Feb 2007
    Location
    USA
    Posts
    20
    Downloads
    0
    Uploads
    0

    Default

    I order a book about one month ago on jet engine construction but still have not received it. I do not know how the rest of the jet works so i am stuck for a while. I am going back to school next Thursday and i will make a plastic prototype of the airfoils in the STL machine. Can someone explain how the flame holder works so I can design one.



  5. #5
    Registered
    Join Date
    Feb 2007
    Location
    USA
    Posts
    20
    Downloads
    0
    Uploads
    0

    Default

    Made prototype models of my compressor and turbine blade design on STL machine.

    http://s236.photobucket.com/albums/ff157/klaustigman/



  6. #6
    Registered
    Join Date
    Feb 2007
    Location
    USA
    Posts
    20
    Downloads
    0
    Uploads
    0

    Default

    I have the ability to machine the airfoils but I do not have the ability to engineer
    the airfoils to make an effective jet. There are also many other aspects that I am not qualified to engineer. I also do not have the capabilities to machine a shaft within the tolerances needed. At such a high speed that the engine would
    run at everything would have to be concentric and perfectly balanced for the engine to function properly. I am abandoning the project because it is beyond my capabilities. This is a project for a fully qualified engineer.



  7. #7


  8. #8

    Default Re: Turbojet

    those are cool. any one use cnc machined turbine wheel

    5 axis CNC Machining Center -JPM
    jackpowermodel@gmail.com www.jackpowermodel.com


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Turbojet

Turbojet