Build Thread 1.st stage axial compressor designed with DIY automated CAD construction workflow

Results 1 to 2 of 2

Thread: 1.st stage axial compressor designed with DIY automated CAD construction workflow

  1. #1
    Registered Harpye's Avatar
    Join Date
    Jul 2007
    Location
    Germany
    Posts
    177
    Downloads
    0
    Uploads
    0

    Default 1.st stage axial compressor designed with DIY automated CAD construction workflow

    Hello Guys - here is my first attempt on an axial compressor for jet enginge purposes. to go easier with the free form surface design I wrote an automatism in Cad Scripting under Rhino VBR



    Similar Threads:
    Attached Thumbnails Attached Thumbnails 1.st stage axial compressor designed with DIY automated CAD construction workflow-einlass-jpg   1.st stage axial compressor designed with DIY automated CAD construction workflow-v1-s1-jpg  
    Why reach for speed, when you could have precision instead!!!


  2. #2
    Registered
    Join Date
    Feb 2006
    Location
    USA
    Posts
    98
    Downloads
    0
    Uploads
    0

    Default Re: 1.st stage axial compressor designed with DIY automated CAD construction workflow

    have you estimated the stage compression ratio? At such a small scale the blade airfoil matters less due to the Reynolds number. what is the compression ratio that you are shooting for when you have the stages done?

    Ray,
    Life is a choice, death is choice poorly made.


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

1.st stage axial compressor designed with DIY automated CAD construction workflow

1.st stage axial compressor designed with DIY automated CAD construction workflow