Index GS30 (Index s3)

Results 1 to 3 of 3

Thread: Index GS30 (Index s3)

  1. #1
    Registered leturc's Avatar
    Join Date
    Mar 2008
    Location
    Hilchenbach
    Posts
    20
    Downloads
    0
    Uploads
    0

    Default

    Hello guys!

    I recently bought an Index GS30 and I am getting desperate...
    The machine was standing around for a year and I am just trying to get it going again.
    When switching it on, the screen doesn’t show anything, it only flickers.
    So then I tried to delete the PC watch but even that did not work. The machine used to be connected to a PC and only the serial cable comes out of the NC PLC card...
    I also have to add that exactly that card always flashes. A red light blinks on both.
    I don’t know what to do next. Maybe here is somebody that is more familiar with the machine and wants to give me some help.

    Many thanks in advance



  2. #2
    Registered INDEX-Service's Avatar
    Join Date
    Aug 2008
    Location
    Dettingen
    Posts
    242
    Downloads
    0
    Uploads
    0

    Default

    Hello
    Maybe the graphic card is defect.
    Its bets to ask the Index customer service team...



  3. #3
    Registered amirebrahim1's Avatar
    Join Date
    Jul 2014
    Location
    44561
    Posts
    9
    Downloads
    0
    Uploads
    0

    Default

    you need restart your control system.cancel 2,3,4



Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Index GS30 (Index s3)

Index GS30 (Index s3)