Machine turned out after editing

Results 1 to 3 of 3

Thread: Machine turned out after editing

  1. #1
    Registered leturc's Avatar
    Join Date
    Mar 2008
    Location
    Hilchenbach
    Posts
    20
    Downloads
    0
    Uploads
    0

    Default

    Hello everybody!

    I’ve got the following trouble.

    My index gu600 gave up the ghost after editing a unit. I checked up behind in the control cabinet. The whole nc unit was out of order. According to the information given by a technician, I should’ve shunted out the power supply unit.

    This resulted in the following situation:

    The plc unit glows red and can’t be reset.
    The nc unit has two leds: the right one glows red and the left one blinks red.

    Could anybody help???

    Greetings



  2. #2
    Registered leturc's Avatar
    Join Date
    Mar 2008
    Location
    Hilchenbach
    Posts
    20
    Downloads
    0
    Uploads
    0

    Default

    Already done….

    I had a short circuit and all machine data got lost… certainly my not saved programs, too…..

    Tough luck…



  3. #3
    Member
    Join Date
    Jan 2016
    Location
    Iran, Islamic Republic Of
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default Re: Machine turned out after editing

    Quote Originally Posted by leturc View Post
    Hello everybody!

    I’ve got the following trouble.

    My index gu600 gave up the ghost after editing a unit. I checked up behind in the control cabinet. The whole nc unit was out of order. According to the information given by a technician, I should’ve shunted out the power supply unit.

    This resulted in the following situation:

    The plc unit glows red and can’t be reset.
    The nc unit has two leds: the right one glows red and the left one blinks red.

    Could anybody help???

    Greetings

    Hi
    Did you solve this problem
    I got this problem and can't find how to solve it.



Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Machine turned out after editing

Machine turned out after editing