Anyone have a rottler f65-67 and wanna trade tricks or software

Results 1 to 5 of 5

Thread: Anyone have a rottler f65-67 and wanna trade tricks or software

  1. #1
    Registered
    Join Date
    Sep 2007
    Location
    Usa
    Posts
    0
    Downloads
    0
    Uploads
    0

    Default Anyone have a rottler f65-67 and wanna trade tricks or software

    i have one and im always looking for new idea's not sure if anyone here has one but worth a shot let me no what ya got.

    Similar Threads:


  2. #2
    Registered
    Join Date
    May 2008
    Location
    USA
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default

    I use an F65A, I'm not sure what your looking for, but I have some stroker clearance programs.

    I'm also working on a mastercam X post processer, but it's been not quite done for awhile now.

    I learned a few tricks about using G-code and making generic circles, but it takes a lot of time to make simple programs by hand.

    also I'm not sure what an F67A or F68A has for extra options, or if your using one of those.

    KC



  3. #3
    Registered
    Join Date
    Aug 2008
    Location
    Canada
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default CAM post for Direct Motion(RottlerF68A)

    I found a full fuction post for my rottler f68a. I used a Mach2/3 inch post (Modal G code, XYZ and feed, arc defined with IJ incremental, Space between instuction, and with block number) Insert standards,zero above part(or position above reference point) start spindle then let her buck.



  4. #4
    Member dynosor's Avatar
    Join Date
    Oct 2006
    Location
    USA
    Posts
    708
    Downloads
    0
    Uploads
    0

    Default

    T&T

    How can you have a zero post count when I can see at least one?

    Red to red and black to black, or it's ashes to ashes and dust to dust.


  5. #5
    Member
    Join Date
    Sep 2020
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default Re: Anyone have a rottler f65-67 and wanna trade tricks or software

    Anyone have the installation software for a F-65? Ours went south. Bad hard drive and the floppy disks are shot.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Anyone have a rottler f65-67 and wanna trade tricks or software

Anyone have a rottler f65-67 and wanna trade tricks or software