Hyundai-Kia SKT300MS part transfer to sub

Results 1 to 2 of 2

Thread: Hyundai-Kia SKT300MS part transfer to sub

  1. #1
    Registered
    Join Date
    Feb 2008
    Location
    CANADA
    Posts
    3
    Downloads
    0
    Uploads
    0

    Cool Hyundai-Kia SKT300MS part transfer to sub

    Hi,

    I'm using 2 brand news Hyundai-Kia SKT300MS with Fanuc 21TB controller.
    I plan to make work transfer from main spindle to sub spindle while chucks are turning. Does anyones know how to do this with this contoller model. I would like to know if it's only possible with 18T controller or if we can do something.

    Thanks !

    Similar Threads:


  2. #2
    Registered
    Join Date
    Nov 2005
    Location
    Only the USA
    Posts
    219
    Downloads
    0
    Uploads
    0

    Default

    yes you can do it.
    We have a 250 MS with 18-i and a 300MS with a 21-i.

    start both spindles up,
    Give it a M160. Spindle sync
    M162 (Spindle phase sync)
    M119 sub unclamp
    G0 B-23.5???
    M118 Sub clamp
    M69 Main unclamp
    G0 B0 Sub goes home
    M161 cancels spindle sync and spindle phase sync.
    etc.
    etc.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Hyundai-Kia SKT300MS part transfer to sub

Hyundai-Kia SKT300MS part transfer to sub