Need Help! Loading Hyundai Hit 20 parameters

Results 1 to 5 of 5

Thread: Loading Hyundai Hit 20 parameters

  1. #1
    Member
    Join Date
    Nov 2013
    Posts
    38
    Downloads
    0
    Uploads
    0

    Default Loading Hyundai Hit 20 parameters

    I lost my machine parameters. I found a floppy in the back cabinet that I think has them. The problem is I need some instructions on how to load them. There are no disc, usb or floppy input on the machine. I do see a big old serial port however.

    Can anybody shed some light on this for me? Do I need to find an old floppy drive and cable? Does the floppy drive need to be powered etc.

    Thank you

    Similar Threads:


  2. #2
    Member OkumaWiz's Avatar
    Join Date
    Apr 2009
    Location
    United States
    Posts
    1121
    Downloads
    0
    Uploads
    0

    Default Re: Loading Hyundai Hit 20 parameters

    Typically the floppy can be opened on any PC and the parameters can be manually entered if you are in a pinch.

    You would need to set communication parameters for RS232, build a cable, get upload software for the PC in order to reload them via RS232, so it may be more work than manually loading them.

    Which control are you using by the way?

    Best regards,

    Experience is what you get just after you needed it.


  3. #3
    Member
    Join Date
    Nov 2013
    Posts
    38
    Downloads
    0
    Uploads
    0

    Default Re: Loading Hyundai Hit 20 parameters

    Thanks, I'm using the Siemens 840 D control.

    I tried opening the floppy on my computer but it won't open. It asks what I want to open it with. Do you know?

    Thank you



  4. #4
    Member OkumaWiz's Avatar
    Join Date
    Apr 2009
    Location
    United States
    Posts
    1121
    Downloads
    0
    Uploads
    0

    Default Re: Loading Hyundai Hit 20 parameters

    The Siemens should have default parameters stored on the hard drive that can be loaded after a battery failure. I'll attach the crude procedure that I have. The floppy may contain a backup. try to open with wordpad to see if it contains the text files or gibberish. Sometimes scrolling through the file can still show some clues. You will still need to re establish offsets etc. when done and do a careful prove out after completion.

    Best regards,

    Attached Thumbnails Attached Thumbnails Loading Hyundai Hit 20 parameters-siemens-battery-jpg  
    Experience is what you get just after you needed it.


  5. #5
    Member
    Join Date
    Nov 2013
    Posts
    38
    Downloads
    0
    Uploads
    0

    Default Re: Loading Hyundai Hit 20 parameters

    Much appreciated. I need to leave it for the weekend for now but I'll let you know how it goes.



    Thanks



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Loading Hyundai Hit 20 parameters

Loading Hyundai Hit 20 parameters

Loading Hyundai Hit 20 parameters