Hyundai - Kia SKT300MS rigid tapping with main spindle

Results 1 to 2 of 2

Thread: Hyundai - Kia SKT300MS rigid tapping with main spindle

  1. #1
    Registered
    Join Date
    Nov 2017
    Location
    United States
    Posts
    14
    Downloads
    0
    Uploads
    0

    Default Hyundai - Kia SKT300MS rigid tapping with main spindle

    Getting an error code 205 "rigid mode DI SIGNAL OFF" when attempting to rigid tap with main chuck spindle. Param 5200 G84 bit is 1

    G20G40G80G99
    G28U0
    G54
    T0303
    G0Z1.0
    X0.
    /M8
    M29S150
    G84Z-.450R-.70P0010F.0313
    G0G80Z1.0
    M9
    G28U0
    G0Z4.0
    M1



  2. #2
    Member
    Join Date
    Jan 2013
    Location
    germany
    Posts
    13
    Downloads
    0
    Uploads
    0

    Default Re: Hyundai - Kia SKT300MS rigid tapping with main spindle

    M122 MAIN SPINDLE RIGID TAP ON
    M123 MAIN SPINDLE RIGID TAP OFF
    M124 SUB SPINDLE RIGID TAP ON
    M125 SUB SPINDLE RIGID TAP OFF
    M126 MILL SPINDLE RIGID TAP ON
    M127 MILL SPINDLE RIGID TAP OFF
    M128 RIGID TAP MODE OFF
    M129 RIGID TAP MODE ON

    so try it with

    M122
    M129Sxxx

    xxx

    M128
    M123



Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Hyundai - Kia SKT300MS rigid tapping with main spindle

Hyundai - Kia SKT300MS rigid tapping with main spindle