Does your machine have the tail stock quill confirmation switches? They may be out of position or you may need to bypass them with M-code in order to turn on the spindle with the quill retracted.
Hello.
I'm with him, the photo alarm. AL-32 center point ng.
the lathe does everything except turn the spindle. does not run in the automatic mode.
Does anyone know how to solve ??
thank you.
Similar Threads:
Does your machine have the tail stock quill confirmation switches? They may be out of position or you may need to bypass them with M-code in order to turn on the spindle with the quill retracted.
Experience is what you get just after you needed it.
AL-32 Abnormality in RAM internal to LSI for serial data transfer
Did you try and load a program as I think your memory requires clearing
Hi
I understand this thread is one year old, but have you solved your problem?
I have a SKT200 2007 Oi with the same alarm.
When i try to MDI ex: M03S1000 it clicks and pops the same Al.
rgds