Need Help! Hyundai Hit-18s with siemens 840c ERROR 9208 Spindle not in set range.

Results 1 to 4 of 4

Thread: Hyundai Hit-18s with siemens 840c ERROR 9208 Spindle not in set range.

  1. #1
    Registered
    Join Date
    Aug 2008
    Location
    USA
    Posts
    57
    Downloads
    0
    Uploads
    0

    Exclamation Hyundai Hit-18s with siemens 840c ERROR 9208 Spindle not in set range.

    I was running parts, 2 done 4 to go, After 3rd piece was put in chuck, I pushed start and walked away. I came back expecting a finished part and machine was just sitting there with the spindle turning (looked a little slow) doing nothing. error on screen was # 9208 " spindle not in set range" All I can find on this error is to check the G26 and G92 set points. G26 = 4600 and G92 is at 1500. Machine should have been at 363 RPM and it was showing 212. Power off - reboot, same thing. I cannot find anything on spindle speed calibration or any trouble shooting on this error. HELP.

    Similar Threads:


  2. #2
    Registered
    Join Date
    Aug 2008
    Location
    USA
    Posts
    57
    Downloads
    0
    Uploads
    0

    Default Re: Hyundai Hit-18s with siemens 840c ERROR 9208 Spindle not in set range.

    Working, I pushed on all the connectors on the simodrive. And it started working, Will update again soon. Going to shut down, pull and re-seat all the plugs.



  3. #3
    Registered
    Join Date
    Aug 2008
    Location
    USA
    Posts
    57
    Downloads
    0
    Uploads
    0

    Default Re: Hyundai Hit-18s with siemens 840c ERROR 9208 Spindle not in set range.

    Re-seating all the connectors did seem to help a little more. Error is now at 0.4% At 1000 RPM machine reads 996 RPM.



  4. #4
    Member
    Join Date
    Sep 2003
    Location
    Auckland, New Zealand
    Posts
    42
    Downloads
    0
    Uploads
    0

    Default Re: Hyundai Hit-18s with siemens 840c ERROR 9208 Spindle not in set range.

    Pretty sure our 15s & 18s lathes are about the same 5-10rpm ut at 1000rpm. You could always check the reading against a tacho & make sure that it's running at the same rpm the control thinks its running at



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Hyundai Hit-18s with siemens 840c ERROR 9208 Spindle not in set range.

Hyundai Hit-18s with siemens 840c ERROR 9208 Spindle not in set range.

Hyundai Hit-18s with siemens 840c ERROR 9208 Spindle not in set range.