Hyundai/KIA CNC Mills? Any good?

Results 1 to 7 of 7

Thread: Hyundai/KIA CNC Mills? Any good?

  1. #1
    Registered
    Join Date
    May 2006
    Location
    Canada
    Posts
    36
    Downloads
    0
    Uploads
    0

    Default Hyundai/KIA CNC Mills? Any good?

    I didn't get any response to my other mill post. Maybe the two models I was enquiring about are new. Does antbody have any experience with the CNC mills from Hyundia/ KIA? Are they good? Any problems?

    Similar Threads:


  2. #2
    Registered
    Join Date
    Sep 2008
    Location
    Holland
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default kia milling machine

    hello
    working for 2 years with a vx 500 and no problems at all.
    i think is a fine machine to work with, the control is a fanuc 21i
    with manuele guide. we are milling aluminium stainless steel and also up to 65 hrc hardened toolsteel and its given no problem.s very stable machine
    greetings fzr1000

    "http://www.youtube.com/watch?v=TlgfRn4U8fw"]YouTube- JOVI Leeuwarden freest(CNC) gehard materiaal.
    "http://www.youtube.com/watch?v=7ys9NY0oV2c"]YouTube- JOVI leeuwarden freest lager pers



  3. #3
    Member Kool Parts's Avatar
    Join Date
    Jan 2004
    Location
    USA
    Posts
    536
    Downloads
    0
    Uploads
    0

    Default

    I have been looking at their lathes myself lately...SKT21L...I have good info from a 3rd party that they are very good. I am going to look into the MX380D today to see if that is one of the "good" ones.
    Gary



  4. #4
    Registered
    Join Date
    Mar 2008
    Location
    Canada
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default

    I`m running a vx-400 with 12k spindle,tsc,fanuc OiMC control for a year and a half now,, I looked at haas and a couple others before I purchased and I`m very happy with the machine,, I do mostly aluminum parts with a bit of SS thrown in as well,,but what suprised me was how well it cuts SS at lower rpm,,I figure the 12k spindle would suck at low rpm,,but its very solid,,



  5. #5
    Registered glovebox20's Avatar
    Join Date
    Jul 2007
    Location
    US
    Posts
    378
    Downloads
    0
    Uploads
    0

    Default

    I ran a Hyundia/ KIA VX500 with a Fanuc 21i-MC control for three months at one job shop that I work for a little while. I was quite pleased with the machine and the Control. I would say it was more way more rigid that the Haas VF mills that I ran and even more rigid that the Hurco VMX 42 that I have run quite a bit. It had ample power for what ever I used it for and the through the Spindle coolant was nice, Although I like the Haas system better because It Purges the spindle before the tool change. The tool changes and rapids are much faster on the VX500 vs Haas VF or Hurco's VMX's and the Chip control was great also.

    The Biggest thing I didn't like about the VX500 was if you were going to use it for Prototype parts were you have a lot of setups and small lot sizes, I would still per the Hurco VMX because of the Conversational controller, and training new employs in who are not familiar with G&M code machines would be more time consuming.

    For a reasonable price CNC mill, I think you can't go wrong with a VX500. The one thing that impress me the most about the VX500 was the rigidity of the mill and the speed, power, chip control and reliability/accuracy was as good or better than the other mills I've used.

    That's my two cents.

    glovbox20



  6. #6
    Registered
    Join Date
    May 2006
    Location
    Canada
    Posts
    36
    Downloads
    0
    Uploads
    0

    Default

    Thanks for all the replies. We ended up buying a used Milltronics RW-15. It was half price of a new one and came with lots of tooling. It's like new with only 500hrs on it. It seems to be a nice little machine, but the control is taking me a little to get used to. We did buy a new Hyundia/Kia turning center, but they were just doing the training on it on Friday.



  7. #7
    Registered
    Join Date
    Aug 2009
    Location
    USA
    Posts
    16
    Downloads
    0
    Uploads
    0

    Default Re: Hyundai/KIA CNC Mills? Any good?

    Here is a page of Hyundai Wia CNC Reviews
    https://www.hillaryinc.com/hyundai-wia-cnc-reviews.htm

    hope it helps



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Hyundai/KIA CNC Mills? Any good?

Hyundai/KIA CNC Mills? Any good?

Hyundai/KIA CNC Mills? Any good?