Hi all just bought a esab CNC table
Model number , combirex CXD-P 4000
at handy money
It's that old it runs on floppy discs

Who would advise ripping all the control gear out and replace with modern gear
I think it runs on servo motors
I only ever worked with steppers on our table, so not sure how servo works
I brought it for the factor that it's a ht2000 hypertherm unit on it, and it would suit us as we need to cut heavier stuff faster 20-25mm
I had a homemade Mach 3 table running a 120Amp thermal dynamics, this esab table is slot bigger 12ft X 30ft which would also suit us better

Similar Threads: