Powermax 105 Torchmate Machine to Hand Torch


Results 1 to 3 of 3

Thread: Powermax 105 Torchmate Machine to Hand Torch

  1. #1
    Member
    Join Date
    Mar 2010
    Location
    usa
    Posts
    60
    Downloads
    0
    Uploads
    0

    Default Powermax 105 Torchmate Machine to Hand Torch

    I have a Hypertherm PowerMax 105 connected to a Torchmate 5x10 table with a machine torch. How do I use a hand held torch to just make quick cuts from scrap? Do I have to unplug the cnc control cables from the back? Then just plug in the hand torch. Or can I leave everything hooked up and just change out the machine torch to the handheld torch but not turn on the program? Thanks in advance.

    Similar Threads:


  2. #2
    Moderator
    Join Date
    Jan 2008
    Location
    USA
    Posts
    2243
    Downloads
    0
    Uploads
    0

    Default Re: Powermax 105 Torchmate Machine to Hand Torch

    Unplug the machine torch, plug in the hand torch. Connect the work clamp to what you need to cut, start cutting. When the machine torch is plugged in it will only fire from a signal through the rear panel CPC port on the Powermax105. When the hand torch is plugged in it will only fire from its trigger switch. There is no need to unplug the CPC connector from the Powermax when using the hand torch. Jim Colt



  3. #3
    Member
    Join Date
    Mar 2010
    Location
    usa
    Posts
    60
    Downloads
    0
    Uploads
    0

    Default

    Quote Originally Posted by jimcolt View Post
    Unplug the machine torch, plug in the hand torch. Connect the work clamp to what you need to cut, start cutting. When the machine torch is plugged in it will only fire from a signal through the rear panel CPC port on the Powermax105. When the hand torch is plugged in it will only fire from its trigger switch. There is no need to unplug the CPC connector from the Powermax when using the hand torch. Jim Colt
    Straight from the man. Thanks so much for the quick response



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Powermax 105 Torchmate Machine to Hand Torch

Powermax 105 Torchmate Machine to Hand Torch