Need Pictures of a Powermax 1000 pcb if anyone can help please!


Results 1 to 3 of 3

Thread: Need Pictures of a Powermax 1000 pcb if anyone can help please!

  1. #1
    Registered
    Join Date
    Jun 2012
    Location
    United States
    Posts
    9
    Downloads
    0
    Uploads
    0

    Default Need Pictures of a Powermax 1000 pcb if anyone can help please!

    I have a Powermax 1000 g3 with a few components burned up on the main board. I want to try fixing it before I move on to parting it out. Since it looks like it is all through hole mounted components they would be easily replaceable. I figure worst case I am out about $20 and an hour or two of my time if it blows back up right away, and best case I have a working machine.

    So since there are no schematics available for these machines I am hoping someone can help me out with some pictures of a good board, and I can see the parts I need that are too burned up to read on mine. All the blown parts on mine are in the upper right hand section of the board. I will attach some pictures.

    I have been hoping for one to come in to the welder repair shop a few doors down from me, but these are getting old and they don't see many that often anymore. If anyone can help I sincerely appreciate it! Shame to junk the machine if there is even a small chance it can be saved for such little effort. Thanks!

    Need Pictures of a Powermax 1000 pcb if anyone can help please!-img_20180101_113407-jpgNeed Pictures of a Powermax 1000 pcb if anyone can help please!-img_20180112_192217-jpg

    Similar Threads:


  2. #2
    Registered
    Join Date
    Jun 2012
    Location
    United States
    Posts
    9
    Downloads
    0
    Uploads
    0

    Default Re: Need Pictures of a Powermax 1000 pcb if anyone can help please!

    I found some elsewhere, but thanks for looking!



  3. #3

    Default Re: Need Pictures of a Powermax 1000 pcb if anyone can help please!

    I have the same plasma cutter. Its burned. Which parts you replaced?

    Thanks



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Need Pictures of a Powermax 1000 pcb if anyone can help please!

Need Pictures of a Powermax 1000 pcb if anyone can help please!

Need Pictures of a Powermax 1000 pcb if anyone can help please!