Move a tool to a safe position in XY


Results 1 to 5 of 5

Thread: Move a tool to a safe position in XY

  1. #1
    Member JerryCM's Avatar
    Join Date
    Oct 2019
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default Move a tool to a safe position in XY

    Hello,

    Is there a way to move a tool to a safe position in XY? I mean, after having done it´s job but before the tool change, I´d like to move any kind of drilling and milling tool away from the part, first in vertical Z and then in horizontal XY.

    In all operations (jobs), the Parameters / Safety / Clearance Plane and Distance are defined Z-direction, retracting the tool upwards. Is there a way to retract in XY-direction? Is there a setting within an operation that I missed? Is there maybe a specially dedicated operation for it? Maybe something in the postprocessing definition?

    I´m using HyperMill Classic in HyperCad-S, 2018.1 for a 2.5 axis milling machine.

    Thanks in advance!



  2. #2
    Member Jim Dawson's Avatar
    Join Date
    Dec 2013
    Posts
    3774
    Downloads
    0
    Uploads
    0

    Default Re: Move a tool to a safe position in XY

    A G53 should do what you want.

    Jim Dawson
    Sandy, Oregon, USA


  3. #3
    Member single phase's Avatar
    Join Date
    Feb 2006
    Location
    Pennsylvania
    Posts
    367
    Downloads
    0
    Uploads
    0

    Default Re: Move a tool to a safe position in XY



  4. #4
    Member handlewanker's Avatar
    Join Date
    Sep 2006
    Location
    Australia
    Posts
    6368
    Downloads
    0
    Uploads
    0

    Default Re: Move a tool to a safe position in XY

    Hi, being a dead noob...….I wrote some code and ended it with first a Z move then an X and Y move to park the tool at the back and left side of the vice for when I want to remove and reload a part......can't think of any simpler way to get the spindle out of the way.
    Ian.



  5. #5
    Member JerryCM's Avatar
    Join Date
    Oct 2019
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default Re: Move a tool to a safe position in XY

    Hello and thanks to everybody that answered to my first post.

    In the end I found that within every Job Definition there´s a tab called NC.
    With the many years of Heidenhain-coding and some trial and error in the postprocessing, as I wasn´t sure how what I did was interpreted, it turned out to be quite a simple solution.

    What I did is in the attachment.

    Attached Thumbnails Attached Thumbnails Move a tool to a safe position in XY-nc-code-jpg  


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Move a tool to a safe position in XY

Move a tool to a safe position in XY

Move a tool to a safe position in XY