tool path help


Results 1 to 3 of 3

Thread: tool path help

  1. #1
    Registered
    Join Date
    Sep 2017
    Location
    United Kingdom
    Posts
    6
    Downloads
    0
    Uploads
    0

    Default tool path help

    i am creating a tool path to finish round the outside of the component but hypermill calcutes one for the inside also, how can i stop this?

    Similar Threads:
    Attached Thumbnails Attached Thumbnails tool path help-doc1-pdf  


  2. #2
    Registered
    Join Date
    Aug 2008
    Location
    UK
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default Re: tool path help

    Hi Mr Radcliffe1978

    Looks like your using a Z Level finishing cycle to get that toolpath?

    if so :-
    You could cap the hole to stop it dropping in and add this surface to the additional surface area found in the setup page of the z lev cycle
    or
    You could add an inner and outer boundary. hyperMILL works by finding every thing on the inside of the boundary and then the inner boundary is not allowing a toolpath inside. If you don't have any boundary it will cut everything
    or
    You could pick just the surfaces you want to machine - found in the boundary page > milling surfaces

    Why don't you call support in UK 01869 290003, many ways to solve this easily if its not z lev finishing cycle.

    Best of luck



  3. #3
    Member muhammet-tas's Avatar
    Join Date
    Dec 2012
    Location
    ?stanbul
    Posts
    13
    Downloads
    0
    Uploads
    0

    Default

    u can use boundry, or u can add stop surface, or u selected tool status past,or, inside.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

tool path help

tool path help