Amada RG 80 Press Brake Problem

Results 1 to 6 of 6

Thread: Amada RG 80 Press Brake Problem

  1. #1
    Registered
    Join Date
    Mar 2013
    Location
    Uninted States
    Posts
    4
    Downloads
    0
    Uploads
    0

    Default Amada RG 80 Press Brake Problem

    My RG 80 Press Brake will not go above 20 tons on a bend. I get no alarms or indication of problem. Has anyone had this issue?

    Similar Threads:


  2. #2
    Member
    Join Date
    Jun 2006
    Location
    Denmark
    Posts
    198
    Downloads
    0
    Uploads
    0

    Default Re: Amada RG 80 Press Brake Problem

    Check oil levels....



  3. #3
    Registered
    Join Date
    Apr 2008
    Location
    USA
    Posts
    17
    Downloads
    0
    Uploads
    0

    Default Re: Amada RG 80 Press Brake Problem

    Check the relief valve on the left end. Also the adjusting bolt that pushes the rod into the distribution valve might have worked loose.
    Hope this helps,
    Tom



  4. #4

    Default Re: Amada RG 80 Press Brake Problem

    Mister NCT has suggested just what to do, The rod that connects your bar pedal to the valve rides on a bolt with a jam nut. You only want to take up the play, so you should still be able to spin the rod with two fingers.



  5. #5
    Registered
    Join Date
    Mar 2013
    Location
    Uninted States
    Posts
    4
    Downloads
    0
    Uploads
    0

    Default Re: Amada RG 80 Press Brake Problem

    The problem was the relief valve. Thank you for your help!!



  6. #6
    pressbraketools's Avatar
    Join Date
    May 2018
    Location
    Milan
    Posts
    4
    Downloads
    0
    Uploads
    0

    Default

    Quote Originally Posted by MachineMfg View Post
    you can read the press brake troubleshooting article, it list 17 common problems and the solutions: https://machinemfg.com/17-press-brak...sons-measures/
    Nice article!



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Amada RG 80 Press Brake Problem

Amada RG 80 Press Brake Problem