Wiring points for a part and tool probe.

[damelman]

I purchased a 2011 Hurco VMO with the probing options disabled. My parts listing and wiring diagram has all the schematics deleted. I think this machine may have been a prototype that just fell into the wrong hands. From the wiring harness I know only Probe 0 goes to TB4 -30 and probe 1 goes to TB4-31. It has sigma v drives and slice io and is running winmax 9.01 Ultimotion. I need to find where to land Part probe status, part probe error, part probe deflect, and tool probe deflect.. It is most likely the same setup as a 2011 or 2012 VM1. thanks in advance.

Similar Threads:

• Need Help!- NEED TO PROBE A BORE WITH MORE THAN 4 POINTS WITH RENISHAW PROBE
• NEED TO PROBE A BORE WITH MORE THAN 4 POINTS WITH RENISHAW PROBE
• Wiring Part Probe on Cincinnati Arrow 500 with Acramatic 2100E
• Syil X4+ probe or tool depth gauge wiring connections
• how to for 94 haas vf3 tool and part probe