HURCO HDD issue Dos utilities disk

Results 1 to 4 of 4

Thread: HURCO HDD issue Dos utilities disk

  1. #1
    Member
    Join Date
    Apr 2010
    Location
    greece
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default HURCO HDD issue Dos utilities disk

    I recently purchased a 1995 BMC 30HT/M mill and so far all works great.

    I've noticed the HDD is making some noise that doesn't sound like it has much life left. I tried to clone the drive onto an SSD, but it's not working (I'm using Windows 10 and used a generic cloning program). I've attempted to alter the BIOS to match the original HDD, but it still doesn't want to work. I've followed various threads regarding HDD failure and replacements and all have resulted in the same thing, a big fat no-go. For now I put the original HDD back in and the machine is working.

    Everything I've read mentions formatting and copying the files to the new HDD via a DOS Utilities Disk. This is the only disk that didn't come in the folder with the machine disks. I have the Software Ver. 1.54 disk 1&2 along with the Ultimax Ver. 1.53 Machine config disk 1 of 1. -side note, anyone know of a software upgrade for this? The machine has the 24 tool-change umbrella if that helps.

    Does anyone have a copy of the DOS Utilities disk or link to where I can obtain it from? Is it available somewhere? I've searched and haven't found it.

    Any help will be greatly appreciated. Thank you.

    Similar Threads:


  2. #2
    Member
    Join Date
    Apr 2010
    Location
    greece
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default Re: HURCO HDD issue Dos utilities disk

    anyone??



  3. #3
    Member
    Join Date
    Jun 2008
    Location
    England
    Posts
    1103
    Downloads
    0
    Uploads
    0

    Default Re: HURCO HDD issue Dos utilities disk

    Before you do anything, put a floppy disk in the machine, format it and save the config to it. I can make hard drives for that machine as ?i used to work for Hurco (I quit earlier this year after nearly 39 years).



  4. #4
    Member
    Join Date
    Jun 2005
    Location
    USA
    Posts
    1723
    Downloads
    0
    Uploads
    0

    Default Re: HURCO HDD issue Dos utilities disk

    Like Bloke said copy absolutely everything on the old drive to another media, I would use a USB flash drive large enough to hold everything.

    Cloning the old drive should have worked? What operating system is on the old computer?



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

HURCO HDD issue Dos utilities disk

HURCO HDD issue Dos utilities disk