Originally Posted by
enaz993
Hello everyone,
I recently purchased a 1984 Hurco KM3P with the Max32 upgrade from a surplus auction. After getting it to my shop and attempting to power it up, I was greeted with no signs of life from the controls other than a blinking cursor on the lower left corner of the left console screen. I also noticed a worrying noise from the hard drive when first powered up, so decided to begin my investigation with that.
After multiple failed attempts at accessing the drive and more concerning noises, I decided to open the case (please see attached photos). Although I do not claim to be a hard drive expert, I have a feeling the contents of this drive are gone forever.
I would like to get this up and running on the Hurco controls if possible. I have seen several threads containing instructions on how to create a new drive that can be used. Unfortunately, I do not have access to the Max32 software files. I asked Hurco if they could provide the software files to me, but they were unable to help.
If anybody knows where/how I could get access to the files and software I need to create a new drive, I'd really appreciate if you could let me know.
Thank you in advance.