At M30 the machine will stop, program rewinds and doors release,
At M00 and M01 Machine will stop, spindle stops but doors stay locked
If I manually remove a tool, And then start the program, The machine will run till that tool is changed into the spindle,
Then the machine stops and a message come up "Put tool into Spindle" and the doors will be unlocked.
I have tried the Interupt button, Doors remain locked.
I really need to have the doors unlock at the M01 or M00.
I have checked the inputs and outputs but cannot find anything out.
Is there a ladder, like in a Fanuc controller I can access to see why the M00/M01 might not be functioning.
Is there a parameter that needs to be enabled to allow these to function.
Thank you

Similar Threads: