- Need Help!- VMX 24 Door issues Ultimax controller
-
Member
VMX 24 Door issues Ultimax controller
At M30 the machine will stop, program rewinds and doors release,
At M00 and M01 Machine will stop, spindle stops but doors stay locked
If I manually remove a tool, And then start the program, The machine will run till that tool is changed into the spindle,
Then the machine stops and a message come up "Put tool into Spindle" and the doors will be unlocked.
I have tried the Interupt button, Doors remain locked.
I really need to have the doors unlock at the M01 or M00.
I have checked the inputs and outputs but cannot find anything out.
Is there a ladder, like in a Fanuc controller I can access to see why the M00/M01 might not be functioning.
Is there a parameter that needs to be enabled to allow these to function.
Thank you
Similar Threads:
-
- Need Help!- VMX 24 Door issues Ultimax controller
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules