- Code for tool radius adjust
-
Member
Code for tool radius adjust
Hi,
is there any code (Fanuc-Hurco-WinMax ISNC) which I can use directly in G-code to adjust tool radius? I need to adjust tool compensation radius for this value, not write a completely new value into tool table. I use CAM software for programming.
In heidenhain I use code DR-<radius> right in line with TOOL CALL, for example:
TOOL CALL "TOOL_NAME" DR-6
...where I can substract DR value from tool radius written in compensation table. There is similar code for Sinumerik, but I have never seen anything similar for Fanuc/Hurco.
Thanks a lot.
Similar Threads:
-
-
Member
Re: Code for tool radius adjust
G41 D-tool.diam offset
tadasdan@gmail.com
+37060022992
-
Member
Re: Code for tool radius adjust
-
Member
Code for tool radius adjust
Last edited by cnc-exit; 10-08-2020 at 02:12 AM.
- Code for tool radius adjust
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules