- Need Help!- Hurco BMC30 Ultimax 3 wont power up,
-
Member
Hurco BMC30 Ultimax 3 wont power up,
Hi
I’ve just taken a punt on a Hurco BMC30, brought without knowing if it works.
So I’ve powered it up and they is nothing on the screen and no LEDs on the controller, see picture.
The servos have a green led and on the digital display -.
I’ve tried pulling the cpu and personality board and checking everything is plugged in ok.
Any held much appreciated?
Similar Threads:
-
-
Member
Re: Hurco BMC30 Ultimax 3 wont power up,
I’ve also checked the voltages on the power supply and they seem okay? The machine has been fitted with a new power supply by lextronixs in may 2019.
-
Member
Re: Hurco BMC30 Ultimax 3 wont power up,
...might be a monitor problem. VGA ?
-
Member
Re: Hurco BMC30 Ultimax 3 wont power up,
So cnc is still dead,
Has anyone retrofitted a control like the Masso to a machine like this?
- Need Help!- Hurco BMC30 Ultimax 3 wont power up,
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules