Need Help! hurco ultimax 2 help

Results 1 to 7 of 7

Thread: hurco ultimax 2 help

  1. #1
    Member
    Join Date
    Feb 2011
    Location
    Serbia
    Posts
    24
    Downloads
    0
    Uploads
    0

    Default hurco ultimax 2 help

    INPUT OVERFLOW! CHECK PROTOCOL! this is the message I get when i load the program on full handshake. I've tried changing the parameters, and i mean all of them. But nothisg seems to work properly. sometimes when i get the baud rate to 600. It runs but too slow, and now it wont even work on 600. What can cause the problem. Someone please help

    Similar Threads:


  2. #2
    Member
    Join Date
    Feb 2011
    Location
    Serbia
    Posts
    24
    Downloads
    0
    Uploads
    0

    Default Re: hurco ultimax 2 help

    Could anyone be so kind to help me out? The only solution for me was a 300 baud rate, but it takes 2-3 times more time to finish something because the code is loading too slow and the machine is waiting for it to load every so often.



  3. #3
    Member machinehop5's Avatar
    Join Date
    Aug 2009
    Location
    United States
    Posts
    1567
    Downloads
    5
    Uploads
    2

    Default Re: hurco ultimax 2 help

    ...try setting Flow Control XON/XOFF (Software)



  4. #4
    Member
    Join Date
    Feb 2011
    Location
    Serbia
    Posts
    24
    Downloads
    0
    Uploads
    0

    Default Re: hurco ultimax 2 help

    I've tried setting xon/xoff and it has worked for me before but for some reason, when i changed the laptop that loads to the machine, it's not working properly. I've also tried with other setting but no luck. When I set the baud rate to 2400 for example, The program loads only 10% of the machine memory and then it states "Input overflow", and stops every action.

    - - - Updated - - -

    I had to change the laptops because the old one died.



  5. #5
    Member machinehop5's Avatar
    Join Date
    Aug 2009
    Location
    United States
    Posts
    1567
    Downloads
    5
    Uploads
    2

    Default Re: hurco ultimax 2 help

    ...USB to Serial adapters are sometimes the problem if, that is what you are using.



  6. #6
    Member
    Join Date
    Feb 2011
    Location
    Serbia
    Posts
    24
    Downloads
    0
    Uploads
    0

    Default Re: hurco ultimax 2 help

    I am using serial to serial directly, and have tried 2 different lap tops.



  7. #7

    Default Re: hurco ultimax 2 help

    Hello msavcic, I need help with the communication of a Hurco with Ultimax II, what is the process to upload an NC file to the Hurco after connecting it to the pc? Do I have to download any software?



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

hurco ultimax 2 help

hurco ultimax 2 help