- Hurco ATC problem
-
Registered
Hurco ATC problem
I have a BMC-2416, I am having an issue with my ATC. The tool pocket won't come down through the control or on a tool change. When I actuate the manual override on the solenoid everything works as it's supposed too. I rewired the connections from the junction box and the tool changer control solenoid after finding some nicks in the wire insulation. Does anyone have any ideas on what to look at next? Or what the part number for the solenoids are so I can track down some diagnostic info on testing them.
-
-
Member
Re: Hurco ATC problem
Write email i send you instruction manual
Išsi?sta naudojantis SM-G960F Tapatalk 4 Lt
-
Registered
Re: Hurco ATC problem
I sent you a message good sir thank you!
-
Member
Re: Hurco ATC problem
Tadasdan@gmail.com
Išsi?sta naudojantis SM-G960F Tapatalk 4 Lt
-
Registered
Re: Hurco ATC problem
Alrighty I shot you an email
-
Registered
Re: Hurco ATC problem
Thank you hopefully the answers are in there!
-
Registered
Re: Hurco ATC problem
Unfortunately I don't see a lot in there regarding the tool pocket down.
-
Member
Re: Hurco ATC problem
Then maybe try check soilenoid. Tage tubes off. And manual switch down then up. Maybe pressure to low. Or it is dameged.
Išsi?sta naudojantis SM-G960F Tapatalk 4 Lt
-
Registered
Re: Hurco ATC problem
Manually switching them works, i.e hitting the bypass buttons on the solenoid. It looks (right now at least) like the solenoid isn't getting any power
-
Member
Re: Hurco ATC problem
In there iswiring chexk 24 vdc.
Išsi?sta naudojantis SM-G960F Tapatalk 4 Lt
- Hurco ATC problem
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules