- BMC30 Boot Problem
-
Member
BMC30 Boot Problem
BMC 30 Ultimax 3 486 ISA board, will not boot no beeps- power supply seems OK
I suspect mainboard is in trouble any ideas please
-
-
Member
Re: BMC30 Boot Problem
Is it possible to get this board repaired and by who ?
Is there a replacement/Upgrade board available for this machine
-
Member
Re: BMC30 Boot Problem
...try removing RAM module(s) and reinserting cards etc
-
Registered
Re: BMC30 Boot Problem
Hi,
in this case there is best to upgrade CPU rack. Install passive backplane, new CPU, Graphic card, SSD HDD and install the latest 2.37 patched software. I made it many many times, after this it will run for many years.
-
Member
Re: BMC30 Boot Problem
Hi Thank you for the reply, Is there a particular board / CPU that is good for this conversion also what graphics card will work for the Hurco, will this fit the original aluminum case or will I need a new chassis ?
and I am hoping my other control cards will fit the backplane
I guess I will need to contact Hurco regarding the software upgrade, thanks in advance
-
Member
Re: BMC30 Boot Problem
Maybe it is ram or cpu or vga.
Listen that beeps. And look in youtube that they mean.
Išsi?sta naudojantis SM-G960F Tapatalk 4 Lt
-
Member
Re: BMC30 Boot Problem
Tested Ram and VGA all OK so it only leaves CPU or Board (no Beeps) I need to get another CPU so I can test
-
Member
Re: BMC30 Boot Problem
Have you Taken the CPU out can cleaned the terminal that connect to the backplane? then try re seating the board. This sometimes works for a short time but usually means the backplane is on it's way out. The CPU will usually start failing by forgetting bios settings or intermittently booting for a while and then completely die. Does the screen give you anything at all when you boot it up or does it just say "no sync"?
-
-
Member
Re: BMC30 Boot Problem
Try measure dc power on pc. In my case was 4.6 V were must be 5
Išsi?sta naudojantis SM-G960F Tapatalk 4 Lt
- BMC30 Boot Problem
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules