BMC40 Positioning error

Results 1 to 7 of 7

Thread: BMC40 Positioning error

  1. #1
    Member
    Join Date
    Mar 2019
    Posts
    10
    Downloads
    0
    Uploads
    0

    Default BMC40 Positioning error

    hi again back with a new error
    trying to calibrate my bmc40 with utimax 3 control. it calibrates the axis fine but the x axis moves to its limit then as it moves back i get the error "error positioning to marker on x axis" ive tried numerous times but cant get past it i can move the axis without calibration and everythign moves as it should.
    anyone she any light on a way round this
    thanks in advance

    Similar Threads:


  2. #2
    Member cnc-exit's Avatar
    Join Date
    Apr 2019
    Posts
    24
    Downloads
    0
    Uploads
    0

    Default Re: BMC40 Positioning error

    Limit switch not working on that axis

    Išsi?sta naudojantis SM-G960F Tapatalk 4 Lt



  3. #3
    Member
    Join Date
    Mar 2019
    Posts
    10
    Downloads
    0
    Uploads
    0

    Default Re: BMC40 Positioning error

    Quote Originally Posted by cnc-exit View Post
    Limit switch not working on that axis

    Išsi?sta naudojantis SM-G960F Tapatalk 4 Lt
    It goes to the limit and stops and it appears on the screen to say its working. Once it reaches the limit it moves away from it in the calibration cycle and that's when it stops the motion and comes up with the above error

    Sent from my WAS-LX1A using Tapatalk



  4. #4
    Member cnc-exit's Avatar
    Join Date
    Apr 2019
    Posts
    24
    Downloads
    0
    Uploads
    0

    Default Re: BMC40 Positioning error

    Ultimax 3 software version 2.15?

    Išsi?sta naudojantis SM-G960F Tapatalk 4 Lt



  5. #5
    Member
    Join Date
    Mar 2019
    Posts
    10
    Downloads
    0
    Uploads
    0

    Default Re: BMC40 Positioning error

    Hi cnc-exit i will have to check the software version and get back to you but its definetly ultimax 3.



  6. #6
    Member cnc-exit's Avatar
    Join Date
    Apr 2019
    Posts
    24
    Downloads
    0
    Uploads
    0

    Default Re: BMC40 Positioning error

    Ir can bethat parameters not set good. You need make copy of harddrive.

    I have my copy that working.
    But soft must be same. Because key not work.


    tadasdan@gmail.com
    +37060022992



  7. #7
    Member
    Join Date
    May 2017
    Location
    United States
    Posts
    53
    Downloads
    0
    Uploads
    0

    Default

    Quote Originally Posted by Bunje View Post
    hi again back with a new error
    trying to calibrate my bmc40 with utimax 3 control. it calibrates the axis fine but the x axis moves to its limit then as it moves back i get the error "error positioning to marker on x axis" ive tried numerous times but cant get past it i can move the axis without calibration and everythign moves as it should.
    anyone she any light on a way round this
    thanks in advance

    I had a similar problem on a hurco hawk with max3. Ended up being a bad ground in the limit switch that never let the machine know it had come off the switch after making contact.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

BMC40 Positioning error

BMC40 Positioning error

BMC40 Positioning error